Occasional Newsletter: 
KnivesAndKnifeMaking.com

(Knife Kit) Build Your Own Damascus Tanto Knife with Tan & Black G-10 Handles and Mosaic Pin Combo Blank Hunting

(Knife Kit) Build Your Own Damascus Tanto Knife with Tan & Black G-10 Handles and Mosaic Pin Combo Blank Hunting

(Knife Kit) Build Your Own Damascus Tanto Knife with Tan & Black G-10 Handles and Mosaic Pin Combo Blank Hunting (Knife Kit) Build Your Own Damascus Tanto Knife with Tan & Black G-10 Handles and Mosaic Pin Combo Blank Hunting (Knife Kit) Build Your Own Damascus Tanto Knife with Tan & Black G-10 Handles and Mosaic Pin Combo Blank Hunting (Knife Kit) Build Your Own Damascus Tanto Knife with Tan & Black G-10 Handles and Mosaic Pin Combo Blank Hunting 
(click to zoom)


Model: KIT_A02_ABROWN_GTANBLACK_F25

This product is for hunting.

This is a kit of 4 compatible items you may use to build your own knife. Full descriptions are below:



KNIFE BLANK DESCRIPTION
(click here to see more images from this item's individual page)


This blade is handmade from 1095 high carbon steel and 15n20 alternating steel layers. As you may know, 1095 is a traditional and sought after American high carbon steel that is prized for knife blades. It is hardened to about 55 on the Rockwell C scale (HRC). This blade is a serious blade that will work well for hunting and fishing. It can be easily sharpened at home or in the field, and will hold an edge very well.

It is genuine layered damascus steel (not fake or imitation damascus).

Blank may require additional sharpening.

Specifications:

Survival Tanto Blade Style (Raindrop Pattern)
9.75 inches Approximate Overall Length
4.6 inches Approximate Blade Length
5.0 inches Approximate Handle Length
1.45 inches Widest Part of Blade
1.2 inches Widest Part of Handle
4mm (1/8 inch) Thick Approximately
Damascus Construction: 1095 High Carbon and 15n20 nickel
Raindrop Damascus Pattern
100-200 Layers of Damascus Steel
Blade comes sharpened. A final edge may be applied for an even sharper razor edge.

This is a stock photo of the item. It is not the exact blank you will receive. Pin hole size(s) and locations may vary. Each damascus pattern will vary and measurements may vary as each blank is hand-made.



SHEATH DESCRIPTION
(click here to see more images from this item's individual page)



High quality straight knife sheath
7.75" total length
Fits up to 6" blade.
2" wide at sheath opening
fits up to 1 1/4" thick knife handles
1/8" Thick Genuine Buffalo Leather.
double stitched for extra strength
high quality
belt loop on back fits up to 1 7/8" width belt
These sheaths are custom made for us.



HANDLE MATERIAL DESCRIPTION
(click here to see more images from this item's individual page)


This is a beautiful pair of tan and black G-10 handle making scales for making a knife. G-10 is an extremely durable material constructed from layers of fiberglass soaked in resin, then oven-baked after compression. G-10 is impervious to UV, moisture & liquid. It is flame resistant and physically stable under climate change. G10 is used the world over in a variety of industrial applications as insulation material and is a high-end handle material due to its unrivaled toughness, low maintenance and excellent grip characteristics. It is also used as reinforcement parts in many types of sports equipment due to its flexibility.

When sanded down and shaped, the layers will become visible, giving an exceptionally handsome look. After sanding and shaping of these scales is complete, it is recommended to rub Vaseline on the scales and wipe them off until theyre not greasy. The colors will pop and Vaseline wont evaporate like mineral oil.

You get 2 scales with each set.

Dimensions:
Length: 5 inches approximately
Width: 1.5 inches approximately
Height: 3/8 inch
Approximately 54 layers (alternating black and tan) per piece of handle material.



MOSAIC PIN DESCRIPTION
(click here to see more images from this item's individual page)


Our mosaic pins are hand-crafted by a veteran knife-maker in the USA.

Please note: Our customer service representatives are not be able to measure pin hole sizes or answer pin-related questions about our various knife blanks. Also, the pin hole sizes and locations in our blanks can vary from batch to batch. Thank you for your understanding and respecting this.

As a second note: It is possible to drill any knife blanks pin holes larger (or create your own pin hole locations). You simply need to use drill bits intended for drilling metal, which are capable of drilling through hardened high carbon steel. This method is recommended because you be able will get the exact fit you are looking for when using our mosaic pins.

Specifics:

This mosaic pin is 3/16" in diameter.

You will receive one piece of mosaic pin stock. Each piece comes in approximately 5.8" length.

We use only the highest quality brass, copper and steel.

If your knife handle is 0.75"-0.9" thick, this mosaic piece will make 6 pins when cut, good for several knives.
If your knife handle is 0.95"-1.15" thick, this mosaic piece will make 5 pins when cut, good for several knives.
If your knife handle is 1.2"-1.4" thick, this mosaic piece will make 4 pins when cut, good for several knives.

Our mosaic pins have been vacuum-pumped to remove air bubbles. The resin is pulled in with a high-end vacuum, which pulls the glue down, and removes any small bubbles. The pins are cured afterward and lastly polished and burrs removed.

The center of the mosaic pin is filled with clear epoxy resin. The filling will appear dark when initially received, however light will be able to shine through when you are done cutting this down to small pieces for your knife handle. The transparency will become evident with the smaller length pieces.

You wont get any "rattlers" with our high quality mosaic pins (a "rattler" is where you have loose pieces inside the mosaic pin due to inadequate vacuum pumping out of air bubbles prior to the curing stage).

A penny is shown for a size comparison. Penny not included.



You save $5 when buying these items as a kit. There is a further discount when buying 2 kits of this type (see below).


This makes a great holiday gift, Christmas present, gift for your father, father's day gift, surprise for your husband, mens, guys, men, mens gift. It is great for hunting, skinning, camping, hobbyists, do it yourself, diy, outdoors men.


Buy 1:  $92.34 each

Free shipping in USA.
You may update the quantity in the cart.


Buy 2:  $88.34 each
($176.68 total)

Free shipping in USA.
You may update quantity of sets in cart.



Don't forget to add Shipping Insurance!
Only $2 per item

Protects your items against shipping damage and loss. Click on this button to add shipping insurance to your order after adding your item. One insurance per quantity please.

(1.51 lbs)


Customers who bought this item also bought the following items:
[no image]
Damascus Blank Upswept Curved Skinning Skinner Blade Hunting Hunter 1095HC

 $39.95 

[no image]
Damascus Knife Blank Blade Drop Point Hunting Skinning Skinner Best Steel 1095HC

 $39.95 

[no image]
Hunting Damascus Knife Making Knives Blank Blade Billet Bar Steel Swirl Blanks Layers

 $41.45 

[no image]
Hunting Tracker Raindrop Damascus Large High Carbon Steel Blank Blade Knives Knife Making Blanks

 $43.45 







KnivesAndKnifeMaking.com © 2012-2016